TESTER for TinySwitch 1-4 family chips & similar pinout ICs WITH VISUAL CONTROL + 46V/4A (8A MAX) DC VOLTAGE REGULATOR PWM-TESTTNY
The TinySwitch Chip Tester of the 1-4 version of the family allows you to quickly, easily and safely test the performance of very popular chips. The American company Power Integrations has developed and for many years produces several families of integrated circuits (IC) for low-power and small-sized networked pulse flyback power sources with galvanic isolation of output voltages from the network united by the common name TinySwitch. These chips are different, but they can all be tested with a PWM TESTTNY tester.
TinySwitch ICs are used in cell phone chargers, switching power supplies (UPSs) of radio telephone extenders (cordless radiophones) and antenna amplifiers, standby power supplies of TVs, personal computers, etc.
Often the cause of a malfunction of the power supply is the failure of the built-in MOSFET chip of the TinuSwitch series or the fatal damage of the chip by electricity (the chip burned without external signs of damage). Does the PinyM TinySwitch chip generator work? How to check the health of the TinySwitch chip? This problem is solved by the company PWM-TESTTNY tester. In addition, the device allows you to detect defective and fake TinySwitch chips from all four families of IC. Very often, chips from China are defective or simply fake. For a fake microcircuit a separate unit may not work, or, for example, generation is not stable.
Therefore, we recommend checking even the new TinySwitch series chips for operability. Even Power Integrations' original semiconductor integrated circuits can be damaged by static voltage during transport. The PWM-TESTTNY device allows you to check a chip simply, quickly and with visual control. Even without an oscilloscope. With an oscilloscope, you can check the quality and performance parameters. But usually a visual check with LEDs and an integrated voltmeter is enough.
Testing SMD versions of TinySwitch IC
TinySwitch microchips and it analogues can be produced in SMD packages: 8-Lead SMD-8C, 8-Lead SO-8C, 12-Lead eSOP-12B. Adapter for SMD testing is not included in standard KIT, but you can buy SMD adapters separately, if you plan to test chips not only in DIP package. PWM company can offer IC SMD adapters for 8-Lead SMD-8C package of TinySwitch SOIC8⇒DIP8. Adapters for 8-Lead SO-8C & 12-Lead eSOP-12B are not available.
The TinySwitch Chip Tester for ICs families versions 1-4 is available in two versions:
1. The DIY version of the device for self-assembling. This version comes in the form of parts and a set of electronic components for assembling the device. It is necessary to solder the electronic components on the printed circuit board, twist and assemble the details of the device.
2. The READY version of the device assembled by the PWM company and is ready for use
The device's online documentation & manuals
The PWM company provide two manuals for this testing tool at company's website http://pwm.company. You can find all information using the model name TESTTNY:
- DIY instructions guide for assembling the components of the circuit board, for testing and using
- DIY assembly Guide of enclosures for PWM-TOOLS testers.
The main functions of the TESTTNY tool:
1. Popular IC 1-4 family TinySwitch series tester
2. High voltage generator MAXIMUM 46V with voltage regulation & voltmeter on board
3. Tester of zeners 40V max / Tester of TVS diodes/ Tester of adjustable zener IC TL431
4. 5V & 3.3V output voltage source with current limiter for DIY projects
Officially supported chips for the testing in DIP8 package
TinySwitch 1 IC: TNY253 TNY254 TNY255. TinySwitch 2 IC: TNY263 TNY264 TNY265 TNY266 TNY267 TNY268. TinySwitch 3 IC: TNY274 TNY275 TNY276 TNY277 TNY278 TNY279 TNY280. TinySwitch 4 IC: TNY284 TNY285 TNY286 TNY287 TNY288 TNY290. This list can be extended in the future. This testing tool allows to test IC in DIP8 package, but using IC package adapter may test SMD chips as well. SMD adapter not include in standard equipment.
The testing tool provide testing of the main blocks of TinySwitch 1-4 family series chips with:
1. Stabilized output 5V & 3.3V test circuit (voltage switching with SW4)
2. Regulated input voltage for IC powering. MAXIMUM 46V. Safe IC testing technique.
3. Correct voltage output detection block with LED indicator via 5V output level
4. Visual control of TinySwitch working via LEDs & voltmeter on board
5. BNC connector for IC output testing using external oscilloscope
6. DC-005 Jack connector for 5V & 3.3V DC output
The testing tool PWM-TESTTNY provide TinySwitch 1-4 family series testing:
1. With low voltage powering (46V MAXIMUM) for safe & easy testing
2. With over-voltage & short circuit protection for damaged IC
Powering of the tester
The AC-DC power adapter is not included. For the powering of the device you can use any DC adapter or any DC power source 10V-20V and with minimum 0.3A output current. The connector type: male DC Power Jack 5.5x2.1mm (DC-005 Jack). Do not exceed 22V input voltage. Power the device from current limited 8A MAXIMUM source & protected from mains for the safety reason.
|Device functions||1. Popular IC 1-4 family TinySwitch series tester 2. High voltage generator MAXIMUM 46V with voltage regulation & voltmeter on board 3. Zener 40V max / TVS diodes/ TL431 reference tester 4. 5V & 3.3V output voltage source with current limiter for DIY projects|
|PCB design's version||2 or 2.1|
|Device input voltage||10-20V DC. 0.3A MIN. 4A MAX, 8A PEAK MAX|
|Device output voltage||46V MAXIMUM voltage , regulated with potentiometer & with built in voltmeter|
|Voltage converterter||YES, DC-DC boost converter up to 46V|
|Tested Integrated circuit|
|Tested chip's description||Chips from the TinySwitch series from Power Integrations (PI). The company specializes in the design and production of microcircuits for various power sources and makes very interesting things. The TinySwitch series, on the other hand, is a line of network power supply controllers in a flyback topology with an integrated high-voltage MOSFET switch. TinySwitch application: 1. auxiliary power sources for PCs and other devices 2. power supplies for set-top-box 3. power supplies for household, industrial devices and flowmeters 4. chargers for mobile phones, PDAs, tablet PCs, portable audio devices TinySwitch-II series microcircuits differ in their capabilities from TOPSwitch-II, TOPSwitch-GX and TOPSwitch-FX [5–6, 8–9] microcircuits not only with lower power, but also with a simplified switching circuit. Improvements have been introduced into the microcircuits to increase the reliability of the inverters, reduce the size of the transformers used and increase the efficiency. Features of this series of chips: 1. "soft" start, reducing overload and facilitating the operation of the chip and other elements of the converter; 2. control of network voltage reduction beyond the permissible level; 3. Built-in generation frequency modulation, reducing the level of interference; 4. ability to work without load; 5. thermal protection with hysteresis on temperature at switching off and on; 6. a simplified feedback circuit that does not require additional winding; 7. small own consumption. TinySwitch Series ICs are available in two types of cases - DIP-8 and SMD-8. To increase the electrical strength of the buildings, seven conclusions were used, conclusion 6 was excluded.|
|Officially supported chips of tester||TinySwitch 1 IC: TNY253 TNY254 TNY255. TinySwitch 2 IC: TNY263 TNY264 TNY265 TNY266 TNY267 TNY268. TinySwitch 3 IC: TNY274 TNY275 TNY276 TNY277 TNY278 TNY279 TNY280. TinySwitch 4 IC: TNY284 TNY285 TNY286 TNY287 TNY288 TNY290|
|Possible SMD versions of the housing of the microcircuit||8-Lead SMD-8C, 8-Lead SO-8C, 12-Lead eSOP-12B|
TESTER for TinySwitch 1-4 family chips & analogues WITH VISUAL CONTROL + 46V/4A (8A MAX) DC VOLTAGE REGULATOR PWM-TESTTNY
- Brand: PWM Company
- Product Code: TESTTNY
- Supported CHIPS: TinySwitch 1-4, TNY253, TNY254, TNY255, TNY263, TNY264, TNY265, TNY266, TNY267, TNY268, TNY274, TNY275, TNY276, TNY277, TNY278, TNY279, TNY280, TNY284, TNY285, TNY286, TNY287, TNY288, TNY290
- Availability: In Stock
- 2 or more 2,701.00₽
- 3 or more 2,263.00₽
- 10 or more 1,971.00₽
Supported CHIPS: TinySwitch 1-4, TNY253, TNY254, TNY255, TNY263, TNY264, TNY265, TNY266, TNY267, TNY268, TNY274, TNY275, TNY276, TNY277, TNY278, TNY279, TNY280, TNY284, TNY285, TNY286, TNY287, TNY288, TNY290